Laboratory EquipmentLaboratory Equipment ›  Water PurificationWater Purification ›  Point of Use SystemsPoint of Use Systems ›  Type 1 and Type 2 SystemsType 1 and Type 2 Systems › Barnstead* LabTower* TII
false
ThermoScientific
-1
 

Barnstead* LabTower* TII

Thermo Scientific* Barnstead LabTower TII is a high-tech, complete system for supplying laboratories and medical use, featuring purification and tank within an integrated system.
The Barnstead LabTower TII converts tap water into high purity water and provides water storage for a complete Type 2 water solution.
Products on this page may include voltages not considered standard in North America. Please review carefully.
 
 
 
 
Part Number Description   Quantity
50132191 Barnstead LabTower TII 20 with 3 l/min pump
Request Quote
50132193 Barnstead LabTower TII (UV) 20 with 3 l/min pump
Request Quote
50132196 Barnstead LabTower TII 40 with 3 l/min pump
Request Quote
50132141 Barnstead LabTower TII (UV) 40 with 3 l/min pump
Request Quote
Please Note: Availability may vary by country.  
 
Consistent water quality

  • Type 2 laboratory water meets ASTM Type II, CSLS-CLRW and ISO 3696 international standards
  • The LabTower is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity

Compact mobile design

  • Two system options with permeate flows of 20 or 40L/hr
  • Stand-alone design with integrated 100 L reservoir takes up zero bench space.
  • Castors allow easy re-location
  • Systems can be upgraded later to accommodate growing water demands

Two Ways to dispense water

  • Dispense directly from the system via the dispensing valve for calibration solutions, reagent preparation, filling of containers, general rinsing purposes, etc.
  • Dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc.
Integrated 100L reservoir

  • Up to 100L of high purity water ready for dispensing when needed
  • High purity polypropylene reservoir is opaque to light
  • Conical bottom allows complete emptying for efficient cleaning and disinfection
  • Adjustable setting for reservoir volume can be programmed for times when demand is low, allowing you to only store water that you can use

Clear information on system display

  • The large four-line display is code-protected to prevent accidental changes in system settings
  • Illuminated and easily readable, the display provides information on resistivity or conductivity, operating mode status, such as "“roduction”, “stand-by” or sanitization, and volume of the reservoir in %

GLP-compliant documentation

  • LabTower TII has been developed to meet or exceed GLP requirements
  • Recorded and traceable data can be obtained by print-out via the RS-232 interface and accessory printer
  • Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.01 cm-1 to an accuracy of ±0.1°C

Pretreatment

  • 5µm prefilter and activated carbon in the combi-filter cartridge protects the RO membrane from free chlorine andparticles
  • Hardness stabilizing cartridge protects the reverse osmosis stage from hard water

Reverse osmosis and reservoir

  • Pretreated water is pressure-forced through the permeable reverse osmosis module removing 97- 99% of all inorganic ions, 99% of dissolved organic substances as well as microorganisms and particles
  • The built-in 100 L reservoir has a conical bottom outlet to optimize cleaning and sanitization

Ion exchange and UV

  • RO membrane removes up to 99% of impurities. All remaining ions are removed by the low TOC, high-purity
  • resins in the ion exchange cartridge.
  • Irradiation with UV light (TII units with UV option only) eliminates any bacteria or germs that are present

Optional Hand Dispenser

  • Gain increased flexibility by adding a hand dispenser with 3 meter cord (part# 50138221)

 
 
 
 
 
 
Help image

Need Help?


Have a Question?
We're here to help you.

Select Country for Contact Info This website provides global contact information for our products and services. When you select a Contact Country, the contact information that is displayed by default will be for this country.



  • Sales
  • Service
 

In The Spotlight

Break the Glass Habit Switch to Plastic

NewsView more »

Break The Glass Habit with Thermo Scientific Nalgene Labware

Break the habit of using glass labware and take advantage of the benefits of plastic: durability, light weight, and low cost.

uspgh-zcom-p3-leg7.fishersci.com:80