Boasts superior anti-blooming performance and features command stop motion or PIP (Part in Position) to capture and read asynchronous high-speed events in center frame. Versatile camera head-mounting feature simplifies installation in small spaces, and the standard “C” mount lens adapter provides back-focus adjustments.
- Charge Injection Device (CID) imager is inherently tolerant to highly specular lighting overloads
- Optical overloads are highly contained within each pixel or the immediately surrounding pixels so charge is not shared with adjacent rows or columns
- Spectral response is from below 200nm to 1100nm, and coatings are available for X-ray, deep UV, and IR
- Contiguous uniform pixel structure, where the total sensor is active with virtually no opaque areas, facilitates interpixel interpolation for subpixel edge definition
- Frame reset, inject inhibit, and dump functions may be used in combination or independently to capture and read Asynchronous high speed events in center frame
- Camera may be synchronized with an event to precisely locate a part in the field of view, and the use of a strobe allows blur-free images; features a 2:1 interlace-scanned 776(H) x 512(V) CID array with 12.0 x 13.7 micron (4:3) aspect ratio pixels
- Charge Injection Device (CID) Imager Technology
- Asynchronous full-frame capture
- Interlace RS-170 video format
- 12 x 13.7 micron contiguous pixels
- Precise edge detection
- UV through near IR response
- Selectable 2X, 4X video gain boost
Required Accessories: Requires an external power source supplying +11.5 to +17VDC.
Recommended for: - Remote gauging, metrology
- Inspection and measurement
- Edge detection
- Laser beam profiling
- Tracking
- Inspection
- Machine vision
- 3-D profiling
