The PRO2001WHP is capable of extracting a sample from a stack or duct, through a heated probe barrel, and filtering out the sub-micron particles using a heated filter to dilute the sample for transport down the umbilical for analysis.
Key Features:- Dilution extractive technology for wet-basis measurement
- Proven heated filter dilution eductor and heated probe barrel assembly
- Housed in a NEMA 4X enclosure to protect from harsh environments
- Durable and easily mountable to the stack or duct
- Simple design for easy component access
- Versatile and cost-effective
Includes: - Heated filter dilution eductor
- Heated probe barrel assembly
- Umbilical termination assembly with all the fittings necessary for connection to the tubing umbilical
Compatible with: - Probe barrel: PTFE-lined Hastelloy, C276 (applications below 275F) or other, specify
- Dilution ratio: 20:1 or 200:1 (requires multiple eductor stages)
- Heated filter assembly: Special material for reactive gases (HCl, NH, THC) or other, specify
- Enclosure: Other, specify
- Non-insulated stack enclosure: cooling, A/C or vortex cooler
Compliance: Meets U.S. EPA requirements as defined in 40CFR Part 75 and 40CFR Part 60 for continuous emissions monitoring using dilution extractive technology for wet-basis measurement.
Recommended for: - Utility boilers
- Turbines
- Cement
- Pulp and paper mills
- Refineries
- Waste to energy facilities
- Petrochemical
- Incinerators
- Cogeneration facilities
