PXS6-130SW, 130kV X-Ray Sources Thermo Scientific

Part Number	Description		Quantity
10144508	X-ray source portable side window 130kV			Request Quote

Please Note: Availability may vary by country.

An external controller is available for driving the unit and setting up and monitoring the target voltage and beam current.

Highly stable flux output of <0.2% standard deviation over 4hr period
0.5mÅ max beam current and titanium filter produces 16R/min output of hard X-rays at 65w
26.7mm Focus-to-Object Distance (FOD)
CU020 controller
Multi-pin connector used tosupply the input power to the X-ray unit also provides connections for remote monitoring and control of the target voltage and electron beam current
Water-cooled with thermal shutdown protection in the event of overheating
Operating voltage range enables use with a wide range of materials

0.2% maximum relative standard deviation over any 4-hour period in 20 hours when operated with the appropriate Thermo Scientific X-ray controller operating above 20kV
The window orientation relative to the housing is factory set to the G position
Shielding of the housing is sufficient to ensure that the X-ray leakage is less than 0.5 mR/hour measured one inch away from any part of the housing
The target voltage and electron beam current are adjusted by using a separate external variable DC voltage source, or by adjusting the programming signal available from the multi-pin connector with external potentiometers
Recommended shielding: lead, 0.125 in. thick (3.2mm)

Recommended for:



	Shopping List - Add an Item Add item to one of your shopping lists. By submitting your data, you agree to the processing of your data in accordance with our Privacy Policy

PXS6-130SW, 130kV X-Ray Sources