The system uses an air driven aspirator which extracts the sample from the stack. It is then passed consecutively through a coarse and fine particulate filter, a preselected glass or quartz critical orifice and diluted with the air from the aspirator. This process has now reduced the dew point of the stack sample to below that of the ambient air.
Ordering Alerts: Available in several corrosion-resistant materials.
EPM.302 In-Situ Dilution Probe - Flanged (EPM.302- __ __)
Material of Wetted Parts
L = Stainless Steel
I = Inconel
H = Hastelloy
C = Halar Coated Inconel
Flange Mounting Included
B = Bored
T = Threaded (Available in Inconel only)
Orifice Flow Rate Selection (Dilution Ratio) Included
A = 20 mil (215:1 to 350:1) Glass [2126.064]
B = 50 mil (95:1 to 150:1) Glass [2126.047]
C = 100 mil (44:1 to 75:1) Glass [2126.044]
D = 150 mil (32:1 to 50:1) Glass [2126.045]
E = 200 mil (27:1 to 37:1) Glass [2126.046]
F = 250 mil (20:1 to 30:1) Glass [2126.048]
G = 500 mil (12:1 to 16:1) Glass [2126.049]
* Please consult factory for other dilution ratios or Orifice selections
EPM.303 In-Situ Dilution Probe - Threaded (EPM.303- __ __)
Material of Wetted Parts
I = Inconel
H = Hastelloy
C = Halar Coated Inconel
Orifice Flow Rate Selection (Dilution Ratio) Included
A = 20 mil (215:1 to 350:1) Glass [2126.064]
B = 50 mil (95:1 to 150:1) Glass [2126.047]
C = 100 mil (44:1 to 75:1) Glass [2126.044]
D = 150 mil (32:1 to 50:1) Glass [2126.045]
E = 200 mil (27:1 to 37:1) Glass [2126.046]
F = 250 mil (20:1 to 30:1) Glass [2126.048]
G = 500 mil (12:1 to 16:1) Glass [2126.049]
* Please consult factory for other dilution ratios or Orifice selections
EPM.305 In-Situ Dilution Probe - Flanged (EPM.305- __ __)
Material of Wetted Parts
I = Inconel
H = Hastelloy
Orifice Flow Rate Selection (Dilution Ratio) Included
C = 100 mil (44:1 to 75:1) Quartz [2126.057]
D = 150 mil (32:1 to 50:1) Quartz [2126.058]
E = 200 mil (27:1 to 37:1) Quartz [2126.059]
F = 250 mil (20:1 to 30:1) Quartz [2126.060]
G = 500 mil (12:1 to 16:1) Quartz [2126.061]
* Please consult factory for other dilution ratios or Orifice selections
EPM.306 In-Situ Dilution Probe - Threaded (EPM.306- __ __)
Material of Wetted Parts
I = Inconel
H = Hastelloy
Orifice Flow Rate Selection (Dilution Ratio) Included
C = 100 mil (44:1 to 75:1) Quartz [2126.057]
D = 150 mil (32:1 to 50:1) Quartz [2126.058]
E = 200 mil (27:1 to 37:1) Quartz [2126.059]
F =0 250 mil (20:1 to 30:1) Quartz [2126.060]
G = 500 mil (12:1 to 16:1) Quartz [2126.061]
* Please consult factory for other dilution ratios or Orifice selections
