Sarasota 200 Multi-Path Clamp-On Ultrasonic Flowmeter

· Multi-drop feature allows up to four Sarasota 200 systems to be used in parallel for process optimization

· Measurement of a wide range of bi-directional flows with no change required to the transducers or path positions to minimize programming and increase productivity

· Multi-path feature reduces flow profile uncertainties, particularly in more challenging flow measurement applications

· Comprehensive internal fault diagnostics increase uptime

· Front-end processing within the transducers minimizes the effect of external interference

· Clamp-on system installs easily with no downtime or process interrruption; also, there are no pipe modifications, spool pieces or drilling required during installation

· Minimal power consumption keeps operating costs low

· Non-intrusive design and no moving parts prolong instrument life

· Remote access capability increases worker safety and productivity

· Errors caused by external interference, signal distortion and signal detection are automatically minimized by the system to increase measurement accuracy

· 1 MB of internal data logging with the capability of recording up to 24 discrete parameters

· RS232 for PC communications and RS232 for modem

· Field-proven Thermo Scientific GAFA PC software for local or remote operation via modem

· Easy-to-use software facilitates set-up, diagnostics, data downloads and new operating software uploads

CE compliant and communication protocols include RTU and ASCII Modbus.

· Hydroelectric power generation

· Large pipes for cooling and condenser water

· Power plants

· Turbine efficiency monitoring systems

· Wastewater applications (WWTP, Sewer CSO)

· Water resource management

· Abstraction compliance and legislation compliance

Accuracy: Overall accuracy typically 2 to 5% of flow reading, depending on site conditions and number of paths; Transducer frequency 2%, matched pairs to 0.5%

Velocity Range: Bi-directional; up to 13m/s (40 ft./s)

Pipe Diameter: 0.45m (18 in.) to 5m (200 in.)

Velocity Paths/Inputs: Up to 8 paths (16 transducers)

Communications: RS232 for PC communications (1200 to 38400 baud); RS232 for modem (1200 to 19200 baud); 2x 12 bit isolated 4-20mA or 1-5V (programmable); 2x volt-free contacts (programmable); fault relay; RS485 half or full duplex

Data Logging: 1 MB capacity