Interfaces directly to a Thermo Scientific infrared reader for the EPD variant models.
- Automatic “discovery ”and reading of a detected EPD
- Individual screen windows for each logical functional area of control
- Multiple functional windows may be opened at once
- Basic EPD Issue and Return functions are supported
- Data logging to text file
- Reading of dose profile with data or graphic display of historical data
- Compatible with Windows*
The following separate windows give access to all EPD functions:
- Dose and alarms: values, settings, Issue and Return, Power On/Off
- EPD status: life time statistics, alarm events, fault history
- Dose profile: data and graphical with time/date filter
- Special total dose store
- Approved Dosimetry Service (Dose of Record) secure memory area
- Calibration: factors and sensitivity
- Scratch pad memory
- Alarm controls: assignment of sound options to individual alarms, audible levels, control over muting
- Display control: check boxes define which displays are visible
- EPD Events: dose profile timing, self test, battery test, count down timer settings
- Communications: control teledosimetry outputs
- Switch set ups: permit/deny manual alarm adjustments, set button operation parameters
- Application set up: serial port assignment, select which parameters groups are logged to data file
- Batch writing: comprehensive control over batch parameters set ups and writing
Required Accessories: System requires minimum Windows 95/98/NT (NB the Thermo Scientific infrared reader must be used with Windows 98. Internal generic IrDA readers may work with Windows 95 and NT).
Recommended for: May be used for simple issue and return of dosemeters, with read/write logging of data
