Gallery* Plus

• Capacity of up to 350 tests/hr.
• Sample disk for 54 samples
• Reagent disk for 42 reagents
• Continuous access to samples, reagents and cuvettes without interrupting test processing
• Ability to achieve very low detection (ppb/µg)

• Several blanking options and automated standard addition method to eliminate sample matrix effects
• Sophisticated dilution management
• On-board barcode reader to enable automatic sample and reagent identification
• Real-time reagent monitoring
• Spectral range from 275 to 880nm; Different filter configurations available
• Optional ECM-unit for Conductivity and pH
• Intuitive graphical user-interface
• Automatic start-up and shut down protocols
• Self-contained, easy to install and maintain

Operating Principle

Automated, discrete photometric analyzer capable for random access analysis

Calibrations

Factor, bias, linear, logit-log, spline, polynomial and point-to-point

Samples and Reagents

9-position sample racks, max 54 positions (= 6 racks) on-board;

reagent capacity 42 positions on-board

Cuvettes

Discrete disposable cuvettes. On board capacity 360 measurement cells.

Dilutions

Automatic sample pre-dilution. Automatic sample dilution of over-range tests with automatic re-run. Addition of manual pre-dilution value for result calculation.

Quality Control

Real-time QC program with multiple and variable rules. Control frequency user-definable. Out-of-specification control results flagged.

Water Consumption

Deionized water consumption 2.5L/hr. Available on-board.

Power Requirements

100 to 240V ±10%, 50 to 60Hz ±5%, 300w

D x W x H

27.5 x 37 x 24.4/51.1in. (70 x 94 x 62/130cm With Open Cover)

Weight

242 lb. (110kg)