• Mass flow controllers dilute standard gases for the calibration of gas monitoring instrumentation
• Multiple calibration routines can be stored in calibrator memory
• Microprocessor-based calculation increases operator availability
• Unit can be operated remotely by a data logger or to perform multipoint calibrations
• Gas Phase Titration for Generation of O₃ and NO₂

• Maximum output: 1ppm at 6 SLPM
• Minimum output: 10ppb at 6 SLPM

Photometer System

• Full scale range: 100ppb to 5ppm user selectable
• Linearity: 1% of full scale
• Precision: 1ppb
• Response time: 180 seconds to 95% of target
• Minimum detectable limit: 3 ppb

iSeries Advantage:

• Ethernet connectivity for efficient remote access
• Enhanced user interface with one button programming and large display screen
• Flash memory for increased data storage and user downloadable software
• Enhanced electronics design optimizes product commonality
• Improved layout for easier accessibility to components

A: 120VAC 50/60Hz (standard)

B: 220VAC 50/60Hz

J: 100VAC 50/60Hz

Calibration Sources

N: No Optional Calibration Sources (standard)

P: Internal Permeation Span Source

T: Gas Phase Titration

B: Gas Phase Titration with Photometer

C: Internal Permeation Span Source with Gas Phase Titration

D: Internal Permeation Span Source with Gas Phase Titration and Photometer

Span Ports

3: Three Span Inputs (standard)

6: Six Span Inputs

Span Gas Mass Flow Controller

A: 50 SCCM

B: 100 SCCM (standard)

C: 200 SCCM

Zero Gas Mass Flow Controller

D: 5 SLPM

E: 10 SLPM (standard)

F: 20 SLPM

Optional I/O

A: None (standard)

C: I/O expansion board (4 to 20mA outputs - 6 channels, 0-10V inputs - 8 channels)

Mounting Hardware

A: Bench mounting (standard)

B: Ears and handles, EIA

C: Ears and handles, Retrofit